Guidlines For Application
• Mark the area with a base line and a beginning and end mark with pencil or masking tape
• Peel the backing off carefully (great care must be taken not to tear or stretch the vinyl at this stage).
• Wet the surface with a clean sponge or lint free cloth, cold water and a small amount of washing up liquid so the surface is moist.
• Position the lettering and roll out from one end, the wet surface allows for repositioning, when satisfied with the final position take a firm squeegee, plastic ruler or soft wooden edge and press the vinyl graphic into the surface, be very firm and even while doing this part. Then very carefully peal off the application tape; being especially careful at the start of a letters edge, the use of a blade might be helpful here to get the letter started.
• When the application tape has been removed use the plastic ruler or squeegee to push out any air bubbles and wipe the surface dry. Allow to dry over night.
